Description
Quick answer: This is the genuine Philips Respironics performance hose (SKU 1032907) — a 6 ft (approx. 1.8 m), 22 mm flexible tube that carries air from your CPAP or ventilator to the mask or patient interface. Standard 22 mm cuffs fit devices and masks from all manufacturers, so it works as a direct replacement across a wide range of setups. Non-heated tubing.
What’s included
- 1 × Philips Respironics 22 mm performance hose, 6 ft (SKU 1032907)
Device and mask not included.
About this tubing
The hose is the least glamorous part of any setup and one of the most consequential: it carries every breath of delivered air, and its condition affects both comfort and performance. Cracks and pinholes cause leaks the device may partly compensate for — at the cost of noise, wasted pressure, and, in ventilation, potentially triggering alarms.
This is a 22 mm hose, the standard adult bore, in the 6 ft length that suits most bedside setups: long enough to turn over freely, short enough not to tangle or drag on the floor. The standard cuffs at each end mean it isn’t tied to one manufacturer — it fits CPAP machines, BiLevel devices, and ventilators using standard connections.
Note this is non-heated tubing. Heated tubes (which prevent condensation “rainout” when humidification is used) are device-specific and are a different product.
Key features
- Genuine Philips Respironics hose (1032907) — durable performance tubing.
- 22 mm standard bore — adult size; fits all manufacturers’ standard connections.
- 6 ft length — practical for most bedside setups.
- For CPAP, BiLevel, and ventilator use — broad compatibility.
- Flexible — moves with you without kinking easily.
- Washable — cleans simply for routine maintenance.
Specifications
| Specification | Detail |
|---|---|
| Product type | Breathing tube / hose |
| Diameter | 22 mm |
| Length | 6 ft (approx. 1.8 m) |
| Type | Standard (non-heated) |
| Connections | Standard 22 mm cuffs |
| Compatibility | CPAP, BiLevel, and ventilators with standard connections |
| SKU | 1032907 |
| Brand | Philips Respironics |
How do I care for it?
Wash the tubing weekly in warm water with a mild detergent, rinse thoroughly, and hang it to air dry out of direct sunlight — hanging it over a door or shower rail lets water drain out fully. Do not reconnect it until it’s completely dry. Inspect it regularly and replace it if you see cracks, tears, cloudiness, or discolouration. Many users replace tubing around every 3 months.
Frequently asked questions
What length is it?
6 ft (approximately 1.8 m).
Will it fit my machine?
It uses standard 22 mm connections, which fit CPAP, BiLevel, and ventilator devices from all manufacturers using standard cuffs. Confirm your device doesn’t require proprietary tubing (for example, ResMed’s AirMini or heated ClimateLineAir tubes).
Is this heated tubing?
No — this is standard, non-heated tubing. Heated tubes are device-specific and sold separately.
Can I use it with a ventilator?
Yes — it’s rated for CPAP and ventilator use with standard connections. Confirm the configuration required by your clinical setup.
How often should I replace it?
Many users replace tubing every 3 months, or sooner if it’s cracked, torn, cloudy, or discoloured.
Do I need a prescription?
No — replacement tubing does not require a prescription.
Can I get it delivered in Brooklyn or shipped nationwide?
Yes — Stark Medical Supplies offers local pickup and delivery in Brooklyn and across NYC, plus USPS shipping throughout the continental U.S.
Use with compatible equipment according to your device’s user guide. Replace if damaged.
Reviews
There are no reviews yet.