Description
Quick answer: This is the ResMed AirCurve 11 ST-A Co-Pack (part 51202) — a complete single-device system of the top AirCurve 11 bilevel noninvasive ventilator, packaged with everything needed to set it up: the device, integrated HumidAir™ 11 humidifier, heated tubing, power supply, and accessories. The ST-A is the most advanced AirCurve 11 model — iVAPS™ with AutoEPAP plus higher pressure capability — for non-dependent patients with complex respiratory needs (COPD, NMD, OHS, chest-wall disorders, central sleep apnea). This is a clinician-configured ventilator (not a consumer CPAP). (The “Co-Pack” is the complete single-unit package; the Tri-Pack, 51203, contains three devices.)
Important — clinician-directed device
The AirCurve 11 ST-A is a bilevel noninvasive ventilator, prescribed, configured, and monitored by the patient’s clinical/respiratory-care team. Modes, pressures, backup rate, alarms, and interface are set clinically. HCPCS E0470 / E0471. This listing is informational and is not medical advice.
What’s included (Co-Pack)
- 1 × AirCurve 11 ST-A device (Air11 platform)
- 1 × HumidAir 11 integrated humidifier — standard water tub (cleanable tub also available)
- 1 × ClimateLineAir™ 11 heated tubing (or SlimLine™ tubing)
- 1 × Air11 power supply (90W AC adaptor + power cable)
- 1 × Air11 air filter
- 1 × oxygen connector
- 1 × travel bag
- SD card + SD card cover (where available)
Masks sold separately. Compatible with ResMed Air11-platform masks.
About the device
The AirCurve 11 ST-A is ResMed’s top bilevel/NIV in the Air11 generation — for patients who need more than standard PAP:
- Therapy modes — CPAP, S (Spontaneous), ST (Spontaneous/Timed), and iVAPS (with AutoEPAP). S/ST pressure 3–25 cmH₂O.
- iVAPS with AutoEPAP — auto-adjusts pressure support to maintain each patient’s target minute ventilation, while adjusting expiratory pressure (EPAP) within preset limits to help prevent upper-airway obstructions — with an intelligent auto backup rate (iBR). iVAPS is indicated for patients ≥30 kg.
- Advanced synchrony — higher cycle-sensitivity options and adjustable Fall Time (plus Vsync, TiControl, Rise Time) for comfort and patient-device synchrony.
- Supplemental oxygen — a rear oxygen inlet accepts supplemental O₂ up to 15 L/min.
- Comprehensive alarms — high leak, low minute ventilation, non-vented mask, apnea, blocked tube, power failure, system error, tube disconnected.
- Touchscreen + QuickNav — intuitive color touchscreen with visual preview graphs; toggle Settings ↔ Monitoring.
- Climate Control — integrated HumidAir 11 + ClimateLineAir 11 (consistent temp/humidity; prevents rainout).
- Connectivity — integrated cellular → AirView (remote management); myAir / Care Check-In where applicable.
⚠️ Air11 consumables — not interchangeable with Air10
As an Air11-generation device, it uses Air11-specific consumables: HumidAir 11 tub, Air11 filters, ClimateLineAir 11, Air11 90W PSU — not interchangeable with Air10 parts.
Key features
- ResMed AirCurve 11 ST-A Co-Pack (51202) — complete single-device system.
- BiLevel NIV — CPAP / S / ST / iVAPS with AutoEPAP; up to 25 cmH₂O.
- Top of the AirCurve 11 line — higher pressure + advanced modes.
- For COPD, NMD, OHS, chest-wall disorders, central sleep apnea.
- Integrated HumidAir 11 + ClimateLineAir 11; O₂ up to 15 L/min.
- Touchscreen + QuickNav + cellular AirView.
Specifications
| Specification | Detail |
|---|---|
| Product type | BiLevel noninvasive ventilator (NIV) — complete Co-Pack |
| Platform | Air11 |
| Model | AirCurve 11 ST-A |
| Therapy modes | CPAP, S, ST, iVAPS (with AutoEPAP) |
| Pressure | S/ST 3–25 cmH₂O (single-fault shutdown >40) |
| iVAPS | Target-ventilation + intelligent backup rate; patients ≥30 kg |
| Oxygen | Rear inlet, supplemental O₂ up to 15 L/min |
| Alarms | High leak, low MV, non-vented mask, apnea, blocked tube, power fail, system error, tube disconnect |
| Humidifier | Integrated HumidAir 11 (standard tub incl.; cleanable available) |
| Tubing | ClimateLineAir 11 heated (or SlimLine) |
| Power | Air11 90W AC adaptor + cable |
| Consumables | Air11-specific (not Air10-compatible) |
| Connectivity | Integrated cellular → AirView; myAir |
| Display | Color touchscreen + QuickNav |
| Weight | ~2.7 lb (device) |
| HCPCS | E0470 / E0471 |
| Pack | Co-Pack (complete single unit), part 51202 (Tri-Pack = 51203) |
| Warranty | 2-year limited |
| Prescription | Clinician-directed (Rx) |
| Brand | ResMed |
Frequently asked questions
What is a “Co-Pack”?
It’s the complete single-device package — the AirCurve 11 ST-A with its humidifier, tubing, power supply, and accessories, ready to set up. (The Tri-Pack, 51203, contains three devices for providers stocking multiple units.)
Is this a CPAP machine?
No — it’s a bilevel noninvasive ventilator, configured by a clinician. It includes a CPAP mode but is not a consumer CPAP.
What makes the ST-A the top model?
It adds higher pressure capability and the iVAPS mode with AutoEPAP (adaptive, volume-assured support) on top of the ST’s spontaneous/timed bilevel with backup rate.
Can I use my Air10 humidifier tub or tubing?
No — the Air11 generation uses Air11-specific consumables (HumidAir 11 tub, Air11 filters, ClimateLineAir 11, Air11 PSU). Air10 parts are not interchangeable.
Does it support supplemental oxygen?
Yes — a rear oxygen inlet accepts supplemental O₂ up to 15 L/min (follow oxygen-safety precautions).
Do I need a prescription?
Yes — this is a clinician-directed device. Contact us to confirm requirements and configuration.
How is it delivered?
Given the clinical nature of the device, please contact us to confirm availability, configuration, and delivery.
The AirCurve 11 ST-A is a clinician-configured bilevel ventilator. Modes, pressures, backup rate, and interface are set by the patient’s clinical team. Follow oxygen-safety precautions if supplemental O₂ is used. This listing is informational and is not medical advice.
